Re: Buzz saw can it be turned in to a small saw mi

Posted by Les...fortunate on February 01, 2005 at 07:41:54 from (12.160.193.93):

In Reply to: Buzz saw can it be turned in to a small saw mill posted by old on January 31, 2005 at 19:21:00:

Rip saws' teeth are swaged. Crosscut saws' teeth are set. It would be easier to take a rip saw (like on a sawmill) and turn it into a crosscut (buzz saw) than it would to go the other way.
You can file alternate corners off swaged teeth to give them "set" but it would be quite the project to take teeth that have been set and swage them. I wouldn't want to do it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]