Re: PTO cement mixer instructions wanted

Posted by Todd L on January 26, 2005 at 19:21:51 from (12.36.202.56):

In Reply to: PTO cement mixer instructions wanted posted by Rod in Smiths Falls, ON, on January 26, 2005 at 17:35:54:

Rod there are several mix designs to use depending on what you are pouring. Check with your local redimix and see what they recomend for your job. I would think that about 6 shovels full of sand and 1 of 3/4 inch crushed rock and 1 shovel of portland would do just fine for most stuff. Water should be added as needed to keep it loose enough to work. To stiff can be to hard to get fineshed and to wet can create problems on set time and strenght. After your mixer is loaded let it mix for 10 minutes or so to get it mixed good then dump it and have at it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]