Re: Gasket sealers

Posted by Nolan on January 21, 2005 at 04:45:07 from (167.102.133.164):

In Reply to: Gasket sealers posted by JD jim A. on January 20, 2005 at 18:19:47:

For the absolute, never get it apart again, super seal, IndianHead Gasket Shalac. It dries hard, so don't try it where flexing is necessary.

My general purpose sealant that I like is Permatex ultra-copper. I tend to use it because I don't have to worry about heat or sensors.

For gasoline sealing, a yellow snot sealant works best. Yamabond, trim adhesive, etc. They don't stick well to the metal, so applying them is a chore.

Follow Ups:

Post a Followup Name: E-Mail: Subject: 65534p> Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]