Re: Gasket sealers

Posted by RJ-AZ on January 20, 2005 at 19:20:13 from (4.240.233.58):

In Reply to: Gasket sealers posted by JD jim A. on January 20, 2005 at 18:19:47:

For water necks, T-stats answater pump areas I like Ultra Red Silicone sealer THINLY smeared on. In some cases where the two mating surfaces are big castings I will use copper coat or Aviation gasket sealer. Some large assemblys now call for an anerobic type sealer which is a Loc-Tite product. For main tractor case assembly I smear the gaskets with plain ol' grease. Knowing what to use where and when and why comes from a lifetime of turning wrenches on all types of machinery.

Follow Ups:

Post a Followup Name: E-Mail: Subject: 65534p> Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]