|
Tractor Talk Discussion Board |
Re: C0-Op Maure Loader....
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BushogPapa on January 10, 2005 at 05:22:11 from (64.12.117.7):
In Reply to: Re: C0-Op Maure Loader.... posted by J. Schwiebert on January 09, 2005 at 19:07:10:
This is the model that has 2 cylinders..one on each side, each attached to a chain that runs over a loop of channel iron--around to an anchor on the pivoting arms..
The arms sit in a mount on the front pedestal of the tractor, and reach down to the main channel irons, and lift from under the channel irons, in long slots..there is a roller in each slot..
The packing at the rod-end is OK..I need to tighten the Piston packing..some oil is getting past the pistons..
At the rear of these cylinders ( the closed end) there is a 1/2" hole...I think there is a possabillity that the piston can be pushed back to that end and a rod inserted, to register with something inside, and the rod rotated, to tighten the piston packing...
Is this possible..??
This is a good loader, and I want to keep it working..!!
Fellas would have us clean out their barns with that Late JD "B" with no muffler, as it didn't throw sparks like most tractors..
It still is my main dirt-mover and snow plow..!!
Thanks for any ans all information..!!
Ron.
Follow Ups:
Home
| Forums
Today's Featured Article -
Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
