|
Tractor Talk Discussion Board |
Re: intermitent miss (sputter) no load ONLY!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jerry/MT on January 09, 2005 at 19:57:06 from (206.183.120.244):
In Reply to: intermitent miss (sputter) no load ONLY! posted by rasputen on January 08, 2005 at 19:56:44:
What's your timing look like? I mean with the engine idling, is your timing mark rock steady? If it's not, it could be wear in the cam drive of the distributor (you all ready took care of the worn distributor syndrome). Wear in the breaker plate/advance mechanism?
It could be poor mixture adjustment. I doubt that porting would do much good because Idle airflow is so low. Porting/polishing helps reduce pressure losses at high airflows, but that's not your stated problem. If you hook up a vcuum gauge and set the mixture to the highest vacuum level at a fixed idle speed that might fix it. Make sure that your governotr linkage isn't giving you some problem. That about taps me out with ideas.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather�s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
Latest Ad:
L35 Kubota
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
