Re: long tractor-560 3pt hyd no work ( ether start

Posted by Brandon Burnette on January 09, 2005 at 14:58:38 from (205.188.117.7):

In Reply to: Re: long tractor-560 3pt hyd no work ( ether start posted by geok on January 08, 2005 at 05:31:44:

I would try what geok said. Check the hydraulic oil strainer/ oil filter. I have seen some of these clogged with shavings from the manufacturing process. If the hydraulics still do not work, remove the four bolts and the main line from the hydraulic control valve. Slide the control valve head off the studs and remove all removable pieces and thouroghly wash all orifices. Slap on a new gasket, new o-rings and copper washers and replace. For parts you can find a local dealer by going to longagribusiness.com.
The hard starting could be from a bad thermostarter or it could be as simple as a loose or cracked line. Hope this helps.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]