|
Tractor Talk Discussion Board |
Re: Model t tractor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by rustyj14 on January 05, 2005 at 19:26:52 from (209.195.139.186):
In Reply to: Model t tractor posted by L Hood on January 05, 2005 at 15:29:34:
The rear end you refer to is a Ruxtell axle-2 speed-controlled from the driver area by a vertical handle and a long rod back to an L shaped rod sticking out of the housing! I know they were used on the cars, but not sure of a truck type rear end. Maybe the later ones had them! Is this a home-made tractor? And are the parts lightly made? Some of the tractors were made by folks who needed a tractor and couldn't afford to buy one. I had several home-made T tractors, with heavier wheels, a stronger frame, and one had 2 transmissions in it, along with a TT truck rear end! The truck wheels had much heavier spokes and rims than the lighter car wheels. As for the manifold, I'm not familiar with the "hot-spot" type you mention. Most homade tractors used regular car engines for motive power, and i think the truck engines were the same as car engines. And, the parts were, too. If i have time tomorrow, i'll check my old car manuals, to see if there is any info in there about Ruxtel axles, and Hot-spot manifolds! (Too late tonight--the mice are playing in the storage area, and i don't want to disturb the cat on her hunt!) As for finding one---well, go to the antique car and tractor web sites, you may find one there! Also truck and tractor swap meets. by: rustyj
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Experimental Tractors Article - by Danny Bowes (Dsl). Tractor technology appears to have nearly hit it's pinnacle of development. If you agreed with the subtitle, you are rather mistaken. Quite, actually. As a matter of fact, some of the technology experimented with over 40 years ago makes today's tractor technology seem absolutely stale by comparison. Experimentation, from the most complex assembly to the most simple and mundane component, is as an integral a part of any farm tractor's development
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|