Re: OT: Key stuck in ignition

Posted by Bob on January 02, 2005 at 22:22:45 from (66.163.134.177):

In Reply to: OT: Key stuck in ignition posted by Keith-OR on January 02, 2005 at 20:35:39:

The LOCK CYLINDER (NOT the igntion switch) commonly fails on these, and acts just as you describe.

To repair it (replace the lock cylinder) the steering wheel, and locking plate mechanism must be removed to access a screw that holds the lock cylinder in place. Then it is a simple matter to pull the cylinder out and replace it with a new one, and reassemble the lock plate and steering wheel.

You might want to check with a locksmith, and get an estimate on replacing it on-site, and comparing that to a tow to the dealer's. (If the locksmith works on those.)

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]