|
Tractor Talk Discussion Board |
Re: Snowblower vs. Plow? Cost?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmall Don on December 31, 2004 at 07:38:42 from (64.83.163.176):
In Reply to: Snowblower vs. Plow? Cost? posted by Kutupembe on December 30, 2004 at 22:14:56:
I have a driveway 2,900 feet from the house to the town road. I use a 706 (it didnt take me long to get a cab) with a loader (my bucket tractor) and a 9ft wide snowblower on the 3pt. We dont get that much snow in southcentral Wisconsin, but when we do its all that 706 can handle. Like Hugh said, you really need a 100+ horse tractor, but if you cant afford it you need to make do. A decent 706 goes for about $3000.00 around here and a loader for a min. of $1,500.00. Ive seen blowers for $500.00 to $3,000.00 and I paid $750.00 for mine. On a trip to Racine recently, I was looking at equip. at Miller-Bradford (Case Dealer) in Sturtevant WI. that had a nice used blower for $500.00. I almost bought it for a spare. Anyway, we dont get much snow (being use to north central WI) but when we do, the driveway can drift in by the time I make my second pass. Plowing the snow only creates windrows the develop drifts deeper. That is why I blow the snow away, using the wind to help rather than bury me in. I will plow 5" or less with my blade on my M and if it gets deep I make a pass with the blower. If the snow is getting deep, I blow it out of the fields on each side (opening up the 12ft wide pass to about 40 to 50 ft wide) in order to create a snow fence situation where the drift depths are minimal. Before I had the blower, I would push and push the snow into piles, sometimes all day long to open it up. The blower has enabled me to greatly reduce my road clearing time (reducing wear on my tractor). Good Luck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|