Re: Axle Weights On Tractors

Posted by paul on December 30, 2004 at 15:19:47 from (66.60.197.218):

In Reply to: Axle Weights On Tractors posted by T_Bone on December 30, 2004 at 12:53:58:

It is a very changable thing, depending what you are doing with the tractor. Loader, & put on as much as you can in back. Mounted tillage, and the front will need to be locked down, the rear won't need any at all as the implement pulls it down. Towing grain wagons or other heavy loads & you need a lot on the back again.

The IHC 2+2's were noted for wheel hop, it was hard to dial them into anything stable.

Going to vary a lot with the model & it's use.

--->Paul

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]