Re: Busted my Rear Snow Blade again!

Posted by Willy-N Blade Pic on December 27, 2004 at 08:20:40 from (64.146.187.188):

In Reply to: Re: Busted my Rear Snow Blade again! posted by BobMo on December 26, 2004 at 21:53:23:

This is the Blade I use. They have one inch harden pins sticking out for the 3 point lower arms to hook up. Having it snap insted of bending was the problem. Not sure if the cold had anything to do with it. The other problem was where the tilt adjustment bracket under the main hitch attached to the blade the weld broke loose. I welded a larger & thicker plate to the thiner blade to give it more area to hold with. At least the blade does not bend like my neibors Rino did the first day he used it! It is a old one and been hammerd quite a bit befor I got it. Mark H.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]