|
Tractor Talk Discussion Board |
Re: Oneway's/ Disk tiller's
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John A. on December 21, 2004 at 20:19:27 from (65.161.170.30):
In Reply to: Oneway's/ Disk tiller's posted by R Wyler on December 21, 2004 at 18:56:31:
R Wyler, My Dad bought a brand new tiller seris 8ft cut oneway plow in 1968 This one had the Stinger wheel (coulter) instead of the heavy weighted angles tailwheel. Going from an old IH 5ft cut to this 8ft cut rig was a major jump in work getting done. Easier to set, run corners, and change for transport was a joy. It was all rubber tired, unlike the steelwheel thing we parked. It was a single shaft of 12 or 14 disk. A little over 8 ft long. Now, don't confuse the subjest by thinking that damm Surflex-tiller series is what I am talking about. This plow is IMOSSIBLE to set, make plow, it ridged, was allaround piece of junk!!!!!! one of Deeres worst ideas. It had sections of 5 or 6 disk / section. A 3 section plow was about 15 ft cut. The trick was to set it so all sections plowed as if it were one unit. It was meant to compete with the Krause 14 to 20 ft flat land oneways Hope this helps. Later, John A.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Talk of the Town: What's The "Stuckest" You've Ever Been? - by Edited by Kim Pratt. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I was about 14 (part of the problem) when I got stuck. I was disking with a cab equipped IH 966. The window was dirty and I was driving into the evening sun. It was hard to see and it was my first pass down the field. I got the tractor so stuck that the underside of the tractor was resting on the ground. My uncle wanted
... [Read Article]
Latest Ad:
65 Massey FERGUSON DIESEL
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|