Re: 7 inch pistons

Posted by Bob-Wyo on December 18, 2004 at 18:19:52 from (198.81.26.81):

In Reply to: 7 inch pistons posted by 840cs on December 17, 2004 at 18:58:30:

840cs
I could send you a list of the ones I know of that have 7" pistons,lots, myself I only go .125 over so as to save the block down the road for 7" boreing.
They can be made to pull. Just hard to get it to the ground as B&D said, and yes they can take it, mine is on it's 7th year @ 7500#, with no problems, everything from the block back is still what the factory put in it in1938,chains,bearings and all. Shucks they used to lug hard all day long, can't understand the concern about pulling them hard for 2 min at a tractor pull, making them work a little is good.
If you would like,email me and we can talk about it, also show you some proof D's can pull a little
Bob

Follow Ups:

• Re: 7 inch pistons 840cs 14:41:32 12/19/04 (1)
  • Re: 7 inch pistons Bob-Wyo 16:07:35 12/19/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]