Re: changing NF to WF

Posted by Walter Squires on December 10, 2004 at 15:02:31 from (68.94.150.243):

In Reply to: changing NF to WF posted by mastertwinkanutty on December 10, 2004 at 14:35:02:

Done it many times, Nothing to it just make sure you use the right length bolts which holds the steering arm on the steering motor, if they are too long they will knock the seal out, I dont remember what length the bolts should be but I do remember they are an odd length, If someone here does'nt know check your JD dealer (very important). There are some wedge shaped washers that go up in the frame under the bolts the really need to be there also.
The same front axle fits 2510 through 4320

Follow Ups:

• Re: changing NF to WF mike brown 06:43:36 12/11/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]