Re: Re: Re: International 240 utility

Posted by ron collins on November 24, 2004 at 03:44:14 from (65.93.42.157):

In Reply to: Re: Re: International 240 utility posted by Bob Ronda on May 24, 2004 at 18:34:02:

re your clutch grinding,hope you got it in time,this noise comes from the yoke clutch release, it holds the bearing that release the clutch this yoke gets bent, and allows bad alignment of the bearing and pressure plate,which tears every thing up.also the rod that activates the yoke, allows the bottom of the yoke to rub on the pressure plate, make sure you have a 3 3/4 inch throwout bearing and not a 31/4 0r 31/2
yoke no.47 716 d from ih chassis page:

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]