|
Tractor Talk Discussion Board |
Finished the Boom, Forks and Hitch Pictures
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Willy-N on November 18, 2004 at 15:02:13 from (64.146.187.185):
Well it is done. Took allmost 12 hours of Fabercating and welding to make it. Forks took a while to form the bottoms and angles so they would be strong. I enclosed the tips in the taper and beefed up the rear and still kept there weight down. I haven't tested the forks yet but I think they can lift 800+ lbs. I know the boom can lift 3,000+ lbs. Mounted the Goose Neck Ball on the top and it can be taken off since the nut is welded on the inside also. A regular Slip in Hitch can go into the hole for the Boom. Mark H.
Follow Ups:
- Re: Finished the Boom, Forks and Hitch Pictures AmeriKen 11:15:37 11/20/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures Chris Jones 21:40:30 11/19/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures cannonball 05:21:16 11/19/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures T_Bone 04:40:14 11/19/04
(2)
- Re: Finished the Boom, Forks and Hitch Pictures Chances R 18:53:42 11/18/04
(2)
- Re: Finished the Boom, Forks and Hitch Pictures Mike (WA) 17:58:31 11/18/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures Hound 17:15:11 11/18/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures Jet9N 16:54:12 11/18/04
(0)
- Re: Finished the Boom, Forks and Hitch Pictures DH in Carolina 16:11:41 11/18/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures TomH 15:56:38 11/18/04
(1)
- Re: Finished the Boom, Forks and Hitch Pictures Tim in NB 15:06:57 11/18/04
(6)
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Profile: Allis-Chalmers WD45 (Gas Version) - by Staff. Beginning production in 1953, the WD45 had the same general look as the WD tractor which was produced earlier - but was much more powerful. This was due to the new 4-cylinder "Power Crater" gasoline engine with a 4 x 4-1/2 inch bore and stroke. Some people feel this was one of the most significant tractors offered by Allis-Chalmers in those days. Nothing in its weight or power class could match its performance. In 1954 they began offering the WD45 with the new "Snap-Coupler&quo
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
