Re: Battery in my Workmaster

Posted by RAB on October 22, 2004 at 08:30:13 from (195.93.34.11):

In Reply to: Battery in my Workmaster posted by yobill on October 22, 2004 at 06:42:40:

You need to be looking for where the current is draining to. If it takes, say 100 hours to drain the battery you are losing about 1% of the battery capacity per hour so the leak would be about one amp for a 100 amp hour battery, or 12 ohms to ground. Should not be beyond most people to find this drain using an amp meter or volt meter or ohm meter. Alternatively, you could find it by disconnection of all circuits and then adding some back until the fault re-occurs.
RAB

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]