|
Tractor Talk Discussion Board |
The tractor demon has been chased away.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by old fashioned farmer on October 11, 2004 at 15:33:52 from (4.131.52.200):
Howdy folks, Well, I wanna say a big thank you to all who put up suggestions (and encouragement) for my post about the 1946 JD A. I started workin on it early this morning. Took the valve cover off and checked and did a little resetting on the valve clearances. Didn't really need anything done. Just a minor adjustment. So, we started it and it did the same thing. Puffin back through. So, while dad went to a visitation I stayed back and totally reset the time again. Got on the tractor and it acted like a wild animal. It backfired through the muffler, made terrible sounds through the petcocks, just awful. Boy, I thought, must have really screwed it up this time. I thought I might have tripped the mag at the wrong point when I had it off doin the reset. So under a hunch I decided to switch the two plug wires on the mag. I had made sure to keep them straight from the start of this ordeal and never changed them. Well, after doing so I cranked and...pop pop pop pop. It started and ran like the well oiled machine it is. After some load and idle adjustments it pulled just fine. I'm guessin that back when grandad tightened those valves and messed them up he must have tinkered with the wires too. Boy what a relief. Sure, it was so simple but man how wonderful. Of course, we're still not out of the woods. Shortly after starting picking again the pickers slip clutch went to pieces and we now have a new one on order from JD. But man I love this old equipment. Thanks again and God bless. --old fashioned farmer
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|