|
Tractor Talk Discussion Board |
Re: 5.3 litre chev V8
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Allan in NE on October 08, 2004 at 22:47:40 from (148.78.243.24):
In Reply to: 5.3 litre chev V8 posted by Arnie on October 08, 2004 at 08:55:13:
Hi Arnie, Boy, I don't wanna speak outta turn here or jump the gun, but something is wrong in Chebytown, to my way of thinking. Are you sure about that code? How sharp was the guy that was reading those codes for you? I just don't think "Code 034" is a viable code. The old straight OBD code of 34 would point at a MAP sensor, but that would have been in the older systems. The newer emission evap codes should fall somewhere in the P0400 range and if indeed you are experiencing a fuel venting (dumping) type leak, it would probably be more on the order of a P0442 or a PO455, if my memory serves. If it is an actual electrical problem (like a vent solenoid) it would of course be a different code, but should still be up in that PO400 number string. Also, just to kick this around a little, the GMs don�t have near the problems with evap systems that the Ford models do. Maybe this young GM lad that has been dropping in on this thread can give you a better answer than I, as I am going totally by memory here; but, it sure doesn't sound right to my mind. Hope ya get 'er going, Allan
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|