Re: Ford 860--Good Deal?

Posted by paul on September 23, 2004 at 18:50:39 from (209.23.145.5):

In Reply to: Re: Ford 860--Good Deal? posted by Jim.UT on September 23, 2004 at 10:22:35:

Jim is correct, on the 'other' end of the clutch
pedal there is a clevis with a pin, that clevis
has 2 holes. To operate the pto at all, you
need it pinned so the clutch pedal is quite
high. with the pedal in the low hole, the pto will
not engage.

The threaded clevis can also be used to
adjust clutch clearance some, but clinking
noises are not normal.

--->Paul

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]