Re: Farmall vs. allis WD-45

Posted by dej(JED) on September 07, 2004 at 10:02:28 from (66.212.143.210):

In Reply to: Farmall vs. allis WD-45 posted by Carlton on September 07, 2004 at 09:08:03:

If you run an AC 45 against an M on a hard surface, the AC will out pull the M every time.
The 45 with ac equipment such as mounted plows
is one very efficient machine. If you try the same AC on an M plow it will struggle. AC mounted equipment placed the load where it needed to be. The M has about a ton on the 45, so it will pull better in the field. They are both very good, but I would give the edge to the M. Porous engine block castings resulted in a lot of cracked AC blocks. That is why you don't find many useable 45's anymore.

Follow Ups:

• Re: Farmall vs. allis WD-45 John (C-IL) 10:25:44 09/07/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]