Re: 1954 M-H Model 33 gas

Posted by Alberta Mike on September 04, 2004 at 05:58:21 from (64.42.242.14):

In Reply to: 1954 M-H Model 33 gas posted by Jack D on September 04, 2004 at 04:46:31:

Sounds like the needle and seat in the carb might need replacing, or maybe some crud has found it's way in there and is keeping the float needle stuck open a bit. The float level might also need adjusting. Tear the carb down, clean everything up and reassemble it as a first step. Be careful when you separate the two halves of the carb so you don't tear the gasket (although you can cut another one). Also, don't attempt to remove any brass screws or jets for now or disaster will strike. Email me if you wish, I have removed the hide feature on my name link.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]