|
Tractor Talk Discussion Board |
Re: Question
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Adam Paul on September 02, 2004 at 22:24:54 from (66.156.18.191):
In Reply to: Question posted by Brenda on September 02, 2004 at 21:21:15:
It is called a David Bradley Tri-Trac. Made between 1954 thru 1957. Powered by a Wisconsin 6 horse engine, sold thru the Sears farm division, so it also got a Sears part number. The part number was 917.59101. It is collectable, but not as collectable as many folks think. It was a failure in the ag/small/hobby farm industry. There are not a whole lot of them around, but you can still get parts for the engine. It"s a challenging tractor to fully restore, mainly because the sheet metal is usually far gone or usually missing. The David Bradley folks want something they can use, the garden tractor folks want something less expensive, and/or slightly easier to restore, and the tractor folks want something bigger and more useful. The other collector folks that remain want something less common than that. I own two David Bradley walk behind tractors, and about a dozen implements. The walking DB"s are more common, so parts, information, and other owners are easier found. With the walking DB folks (like me, amongst many others) the art of the hobby is collecting the implements.... I"ve on many occasions thought about buying a Tri-Trac. At the end of the day, I have a hard time fitting it into my collection... There are others that would really want one, but the owners tend to think there"s gold in them darn hills, and often charge too much. Hope that helps and good luck, Adam
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that�s wha
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|