Had to disconnect neg bat cable to stop starter fr

Posted by Tim K. on August 28, 2004 at 21:58:47 from (24.91.85.41):

Hello All,

I hope someone can point me in the right direction. I have a 1955 850 that I converted to 12volt. All has been fine with the tractor. It starts anr runs fine, that is until the other day. It started with me having to pull on the starter button wire at the same time as I was pushing it to get it started. Now the tractor turns over constintly with out pushing the starter button or having the key in the on mode. I haD IT RUNNING FOR ABOUT 2MIN SO i COULD MOVE IT AND IT melted the two wires on the left side of the ammeter. Now the only way I can stop the starter motor from running is by disconnecting the neg bat cable.

I also jump started the tractor the other day and am wondering if that could have anything to do with this as it started after?

Thank you for any help you can give.

TK

Follow Ups:

• Re: Had to disconnect neg bat cable to stop starte MarkB_MI 08:24:15 08/29/04 (0)
• Re: Had to disconnect neg bat cable to stop starte rustyfarmall 05:54:19 08/29/04 (1)
  • Re: Had to disconnect neg bat cable to stop starte txblu 07:11:39 08/29/04 (0)
• Re: Had to disconnect neg bat cable to stop starte TheRealRon 03:41:32 08/29/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]