Re: question REBUILDING HYDRAULIC CYLINDERS

Posted by T_Bone on August 21, 2004 at 17:06:48 from (4.240.66.19):

In Reply to: question REBUILDING HYDRAULIC CYLINDERS posted by CHEAP_DAVE on August 21, 2004 at 06:07:23:

Hi Dave,

For the rust and nicks inside the bore I used a engine cylinder hone mounted on a piece of 1/2" rod to reach the depth of the cylinder.

I wasn"t too conceened about the chrome pits and nicks. Ya it"ll let in a samll amount of dirt but not enough to be concerened about if the machine will be worked part time.

As stated Braum Hydrulics does a great job with seals. Yes change all seals while your in there.

For a odd size piston seals you can use ones cut out of leather if not available.

T_Bone

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]