Re: Electrolysis learning curve---F-I-T maybe???

Posted by Gary Mckenzie on August 10, 2004 at 06:26:36 from (65.142.156.25):

In Reply to: Electrolysis learning curve---F-I-T maybe??? posted by msb on August 09, 2004 at 21:27:20:

I have also tried the process recently, my results have been very promising. I'm using a 20 gallon container. I was unable to find Arm & Hammer detergent or washing soda, or anyone who had heard of either! After some research, I discovered that washing soda is sodium carbonate, also known as swimming pool ph stabilizer, avaible at Wal-Mart. I use a 1 teaspoon/gallon mixture and an 8 amp charger. I think maybe the stainless could be your problem? Try it with a large piece of mild steel, preferably with a little rust on it.

Follow Ups:

• Re: Electrolysis learning curve---F-I-T maybe??? Gene Davis (Ga.) 20:12:58 08/10/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]