Re: Info. On Farmall h Loader problem lifting.

Posted by john d on August 08, 2004 at 21:08:33 from (64.12.117.10):

In Reply to: Info. On Farmall h Loader problem lifting. posted by Tim Monnier on August 08, 2004 at 07:26:06:

My first though was that it might be low on fluid, but you said it lifts okay with no load.
There is no external pressure adjustment on those hydraulic units. Air in the cylinders might be a possibility, low pump pressure from years of wear is a more likely bet. You could disconnect the hoses, plug one port and put a gauge on the other to test the pressure. If you do this, get a gage that reads about 1000 pounds. You may not need one that big right now, but if you have to re-build the pump, it's no trick to get 750 or more out of them.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]