Re: Disking: Which way do you circle and why?

Posted by TomTX on August 06, 2004 at 14:01:10 from (12.74.220.42):

In Reply to: Disking: Which way do you circle and why? posted by Kelvin on August 05, 2004 at 19:24:39:

As stated below, if you are using an offset disk, you should turn left. 2 reasons. You will break the right front disk if you turn right, as the disk will dig in very deeply. When you turn left you can leave the disk down in the plow position because when you start to turn, the disk will pop up almost out of the ground, ans after the turn will go right back to plowing deep. The Owners Manual for the Series 219 Offset says "Operator should plan all turns to his left."

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]