Re: Thoughts on re-torque'n

Posted by Bob on August 05, 2004 at 21:57:34 from (66.163.134.177):

In Reply to: Thoughts on re-torque'n posted by Randy on August 05, 2004 at 19:42:49:

These parts have been improved so much over the years, if the surfaces, are good, the threads are clean, etc, I would follow the gasket manufacturer's advice not to retorque.
Here's a link to FelPro, with helpfull hints:

http://www.federal-mogul.com/cda/content/front/0,2194,2442_7359_7465,00.html

However, much to my surprise, FelPro does not rule out retorqueing the head IF YOU WANT TO... see item #5 at the link below.

http://www.federal-mogul.com/cda/content/front/0,2194,2442_7359_17015,00.html

Follow Ups:

• Re: Thoughts on re-torque'n George 02:24:04 08/06/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]