Re: Farmall H Governor

Posted by Les on August 03, 2004 at 16:31:43 from (24.64.223.204):

In Reply to: Farmall H Governor posted by Franklin Moore on August 03, 2004 at 14:40:53:

With the engine stopped, take off the governor housing cover and turn the governor screw until it just touchs its stop. Place the hand lever in full speed position and turn the high idle speed screw until it just touchs its stop. Finally, start the engine and place the hand lever in full speed position. Then turn the high idle speed as required. Turning the screw in reduces speed and turning it out increases speed.
The stock setting is 1650 RPM under load, 1815 no load.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]