Re: GRITTY PAINT

Posted by Mike(Wi) on August 03, 2004 at 13:08:16 from (66.170.11.19):

In Reply to: Re: GRITTY PAINT posted by rustyfarmall on August 03, 2004 at 11:18:24:

I try to keep the air as clean as possible. There is a little filter at the air intake on the compressor. I change that usually before painting.

I do not have any rust inside the compressor--I just drain the tank after every use or every night if used a lot.

Bigger problem is dirt in the air around the gun. I rig up a makeshift paint booth that entirely encases what I am painting in plastic sheets. There is only enough room to get around it with the gun and keep the hoses off the object.

Keep everyone else out of there, and have make sure there is some kind of exhaust fan. Even with a respirator, it gets really hard to breathe, and I find myself rushing to get done every time.

Best of luck to you.

Mike

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]