Re: Re: Re: winch wiring

Posted by john in la on July 26, 2004 at 17:41:06 from (65.6.124.51):

In Reply to: Re: Re: winch wiring posted by T_Bone on July 26, 2004 at 14:39:41:

Got to agree with you on this.
Using a snatch block will reduce the line pull; amps needed to pull the load; reduce motor wear; and double the travel per foot time.

The other thing it changes is the spool size needed to reach a full pull. This may not be a concern depending on the amount of line you have.

You need 2 X the cable to use a snatch block. 3 X for a 3 part line.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: winch wiring Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]