Re: Magneto Model A John Deere

Posted by Robert on July 22, 2004 at 07:09:06 from (199.245.220.253):

In Reply to: Magneto Model A John Deere posted by Jason on July 21, 2004 at 19:47:19:

I got to thinking after I posted the earlier response. I told you how to check magneto output at the magneto. You can just pull the plugs, lay them against the block, turn the engine over, and you should see a bluish spark each time you hear the impulse coupling on the magneto "snap". If you don't hear the "snap", then there's a problem with the impulse coupling, and you'll have to take the magneto off to correct the problem. If you hear the "snap", but see no spark, then you will have to investigate---plugs, wires, dirty cap/rotor, point gap, etc.
Do the tests, and post back with what you find. There are lots of good folks on this board who will gladly steer you through any problems you find....

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Magneto Model A John Deere Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]