Re: Mixture of fuels for tractor pulling

Posted by buickanddeere on July 18, 2004 at 23:27:39 from (64.10.41.156):

In Reply to: Mixture of fuels for tractor pulling posted by Phil K. on July 18, 2004 at 12:11:53:

20% methanol and 80% nitomethane. Fuel delievery will have to be increased roughly 8 times at that mix if memory serves.
Seriously. Install a gasoline manifold, 8 to 1 pistons, three angle valve job, blend the valve bowl edges smooth, match the ports, a cam from Roberts, straight stack, dry airfilter conversion and a Pertronics ignition system. 65-75 HP.
Should be able to run in the 6500 and 8000lb classes with that very fast 1st gear.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Mixture of fuels for tractor pulling Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]