Re: 3 point forks - who makes 'em

Posted by greenbeanman on July 13, 2004 at 20:40:12 from (4.244.63.81):

In Reply to: 3 point forks - who makes 'em posted by Mark on July 13, 2004 at 14:26:59:

Remember that pallet forks and round bales forks are not necessarily the same size.

Unless you wish to have the forks for moving pallets in the future, how about just moving the bricks by hand. A three pounds apiece it would probably take about the time to move them by hand as it would take to find, purchase, mount, etc. forks. Depending upon the bricks you should also be able to use carriers to move a bunch at a time.

The tine type hand carriers typically move 5 at a time, most often five with each hand. The tines go into the holes in the bricks.

The clamp type move ten at a time, which is typically how they are packaged in bundles.

The thought of moving all of those bricks by hand is worse than doing it three pounds at a time.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: 3 point forks - who makes 'em Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]