Re: Threadless Grease Zircs ???

Posted by Jake on July 07, 2004 at 22:41:10 from (209.131.251.9):

In Reply to: Threadless Grease Zircs ??? posted by MMB on July 07, 2004 at 20:25:46:

Yep, seen those threadless ones 25 years ago by now.
Problem with them is if you get something plugged up and give them the grease pressure, they blow out of the hole.
If you do need to drill and tap to replace them, there are some available with 1/4-28 bolt thread (not pipe thread) so you don't have to drill such a big hole.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Threadless Grease Zircs ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]