Re: Re: Re: Turbo rebuild or replace ?

Posted by brtex on July 04, 2004 at 20:21:09 from (66.143.194.117):

In Reply to: Re: Re: Turbo rebuild or replace ? posted by Todd in IN. on July 04, 2004 at 12:24:05:

proper way to check the turbo bearing is to remove inlet and outlet and check the clearance with a dial indicator.dont know what the specs are on the ih motor you have or who makes the turbo.if the fins are hitting the casting i would not run it .close to the point of deatruction.ive pulled a lot of heads toget rid of turbo parts. turbos are not hard to rebuild ,but you do need the right tools and a very good manual.if yyou do have it rebuilt make sure that they will give you warrany on it.good luck

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: Turbo rebuild or replace ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]