Re: Removing cast wheel on JD820

Posted by David from Kansas on June 22, 2004 at 10:50:38 from (63.91.16.86):

In Reply to: Removing cast wheel on JD820 posted by Howard Clark on June 21, 2004 at 19:19:03:

Howard,
I'm assuming you are talking about the 2-cylinder 820. Are you trying to remove the cast wheel from the axle, or the axle from the tractor? If removing the cast wheel from the axle, have you removed the retainer from the end of the axle? If I remember correctly, you remove the two bolts holding the retainer in place, place them in the OTHER two threaded holes, and use them to push the retainer from the axle. I did this a couple times several years ago to remove broken axles, but don't remember all the details. Hope this helps. Good Luck. David

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Removing cast wheel on JD820 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]