|
Tractor Talk Discussion Board |
Re: Re: Re: Seized bolts on wheels
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Allan in NE on June 15, 2004 at 07:49:34 from (148.63.132.164):
In Reply to: Re: Re: Seized bolts on wheels posted by Tim on June 15, 2004 at 07:32:56:
Tim, With all due respect, I don't think you have the right tools. I used to have to change the spacing on my tractors about four times a year for different crops. A 3/4" breaker bar just isn't going to get it on those bolts. Do you know of anyone close that has a set of 1" sockets? Or better yet, the original wrench that came with the tractor? My tractors came new with a 18" iron wrench and a 4 1/2 foot cheater tube and I really had to yank on 'em to break them loose even with them not being "set up" like yours. Believe me, they are tight--very tight. Get a big wrench or breaker bar, then the longest cheater you can find; preferably about 6' long. They'll come. When you put 'er back together, you want them just as tight; probably 350 to 400 ftlbs. Just my view, Allan
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Proflie: John Deere Model R - by Staff. The John Deere Model R, the last of the lettered tractors, was the first diesel-powered tractor produced by John Deere with a gasoline starting engine. It was also the first tractor they produced that had an optional steel cab. The photo above shows the tractor w
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
