Tractor Talk Discussion Board |
Re: Off-topic...Update...Boss at work
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul in Mich on June 11, 2004 at 05:03:45 from (68.188.227.110):
In Reply to: Off-topic...Update...Boss at work posted by kentuckykid on June 10, 2004 at 19:21:23:
Kentuckykid, First of all, you do NOT owe this boss 2 weeks notice. Even with a good boss, the common rule is 1 week. I guarantee that when you give 2 weeks to this guy, that you will be gone on the spot. As to the U-joint, accidents happen, and while I suppose your boss can hold you to the $12.80, it is cheap on his part. If he does indeed charge you for the U-joint, you should DEMAND that he give you the U-joint, because you paid for it. Dont throw it away before this happens. Do it after you have it and leave there. But by all means, DEMAND the part. If you are going to pay for it, then get it. You won't be ahead, but you will certainly jerk his chain, and that's just what he needs in that case. Plus it will do wonders for your state of mind. And Tell him that if he cant give you the U-joint, then you cant pay him for it. Actually he can't charge you for it unless you sign a promissary note. If he deducts it our of your wages, just tell him that he has no legal right to do so, that you had no agreement to pay for broken parts. He pays you for the hours you work, not the parts you don't break. You have no account there to charge the part to in the first place, hopefully.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|