Re: DO NOT JUNK BROKEN CASTINGS AND GEARS!

Posted by can we afford you... on June 09, 2004 at 17:49:11 from (63.159.121.47):

In Reply to: DO NOT JUNK BROKEN CASTINGS AND GEARS! posted by Industrial Casting and Ge on June 09, 2004 at 11:47:17:

Nice thought, but who pays the bill, when not a
corporation business expense? A machine shop, run
on the guy's brother's farm,charges about $50.HR.
A two or three decade old farm tractor is not in
the gold category. I can spend one day in the dirt and weeds, pulling a much needed component, on a farm, 150 miles away. I often work 'free' to
get up, and running again. Would you even open the shop door, for $50.HR? We have to stay resouceful, and lean on outlay. Your service may
be marketed to the wrong group, chasing parts on
these Internet searches.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: DO NOT JUNK BROKEN CASTINGS AND GEARS! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]