Re: Gooseneck Hitch Location BW turnover

Posted by T_Bone on June 03, 2004 at 18:22:15 from (4.240.132.235):

In Reply to: Gooseneck Hitch Location BW turnover posted by Redd Tom on June 03, 2004 at 12:04:36:

Hi tom,

Something to consider moving the pin forward, is the F350 has approx 4800lbs on the fornt axle being empty. Maximum spring weight is 5200lbs or 6000lbs if you installed the "X" springs.

The front tires capicity is 6080lbs so your pushing about 90% of maximum tire weight empty and as you near maximum weight rating, noticable tire ware accelerates.

If you read several mfg. install instructions, you will see coments that from axle center line, pin weight shifts 1% average either 4" ahead or behind axle center line. However real world numbers say nothing behind axle center line as trailer handling is noticeable different.

Then consider trailer width as 1/2 the width needs to clear the cab on a 90� turn. If your going to use a 102" wide trailer, this becomes important.

T_Bone

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Gooseneck Hitch Location BW turnover Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]