Re: Charging system

Posted by Bob on April 30, 2004 at 19:17:37 from (66.163.134.177):

In Reply to: Charging system posted by Carl Stacy on April 30, 2004 at 17:43:16:

If you have a 3-wire Delco, the large stud on the back should read battery voltage.

The #2 push-on terminal on the alternator should also read battery voltage.

With the ignition switch on, the terminal labelled #1, which is fed through an idiot light, a resistor which replaces the idiot light, or a diode should read NEAR battery voltage.

With the engine running, above idle, the alternator should be putting out between 13.5 and 14.5 Volts.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Charging system Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]