Re: Re: John Deere model 246 corn planter

Posted by Ed on April 27, 2004 at 10:22:00 from (198.185.163.7):

In Reply to: Re: John Deere model 246 corn planter posted by JMS/MN on April 26, 2004 at 06:58:27:

Your seed supplier should know the correct plate to use as the seed is graded by size to fit a specific plate in plate type planters. Some of the newer non-plate type planters ungraded seed where seed size dosen't matter.

Lincon Ag products still sells almost any plate you will need.

http://www.lincolnagproducts.com/dbpage.asp?page=corn

I believe the plate number references 3 measurements in 32nds of an inch - with, thickness and depth.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: John Deere model 246 corn planter Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]