Re: rebuilding farmall, cant get rods out

Posted by Greasy John (Or.) on April 25, 2004 at 18:50:07 from (208.35.181.159):

In Reply to: rebuilding farmall, cant get rods out posted by curtis on April 24, 2004 at 19:26:09:

Try a Bit of heat ---propane torch of acet.on the area around the caps bolts. Them shove the sleeve and piston with rod attach out the top this may be tough but from what you say the piston/sleeves are toast anyway. At the price of new sleeves and pistons /rings I would not even think of putting junk back. If the shaft and mains are ok its worth it- if the crankcase was full of water for long you may have cam bearing problems along with the oil pump ) Buy the Cowmans M ? ? ) Good luck and keep us updated
John

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: rebuilding farmall, cant get rods out Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]