Tractor Talk Discussion Board |
Re: Brake troubles, need help
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on April 23, 2004 at 04:36:35 from (165.170.128.66):
In Reply to: Brake troubles, need help posted by JR on April 22, 2004 at 21:49:52:
First try to determine whether the problem is the master cylinder, the booster or something else. Suggest applying and releasing the brakes using the foot pedal with the engine running. Now loosen the bleeder on the master cylinder. If the brakes release, the problem's the master cylinder. If they still hold then open the bleeder at the booster. If the brakes now release the problem's the booster. If the brakes STILL hold with the booster bleeder open the problem's gotta be in the hydraulic tubing between the booster cylinder and the first tee. As for repairs, the master cylinder should be simple to rebuild, and parts are available and cheap. However if the vacuum booster is bad it is best replaced. I've found booster parts are nearly impossible to buy. Also boosters are fussy to work on. Besides - you are depending on the booster to help stop your truck! Best to NOT cut corners here!
Follow Ups:
Home
| Forums
Today's Featured Article -
The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|