|
Tractor Talk Discussion Board |
Re: Re: Re: stuck sleeves
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Rick K on April 08, 1999 at 11:12:30:
In Reply to: Re: Re: stuck sleeves posted by Rick K on April 08, 1999 at 11:06:04:
Oh, Ya... If you use CO2 cylinder instead of buying the dry ice, there is one more thing you must know. To make dry ice out of a C)2 tank, they normally have a pick-up tube that runs down to the bottom of the tank, so that the condensed liquid is what is being drawn off, rather than the gas, If you have a CO2 tank for welding, or for dispensing homebrew beer, which is why I have one, you don't have a pickup tube. It would be necessary to invert the tank to draw liquid from it. Not sure about using a regulator when doing this. The gas is under 500-600 # pressure, so some sort of control is needed. Maybe just paying an ice house to do it, and dropping dry ice chips into the sleeve is safe way to go
Follow Ups:
Post a Followup
|
