Re: Welding cracked Manifolds ????????????

Posted by tractor on April 21, 2004 at 09:01:04 from (65.206.136.73):

In Reply to: Welding cracked Manifolds ???????????? posted by JR on April 18, 2004 at 17:20:42:

i am not sure how big the crack is but you can try welding it, but the reason it is cracking may be because were it bolts to the engine is not flush, when you bolt it down it will be fine but as it heats up and cools down it may crack again. i would try to weld it but i would be carefull because when you weld it, it will pull the crack together which may be enough not to alow it to bolt back up. hopefully that was a little helpful. tractor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Welding cracked Manifolds ???????????? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]