|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: New Holland failure
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Adam B. on April 18, 2004 at 05:52:58 from (199.35.101.226):
In Reply to: Re: Re: Re: Re: New Holland failure posted by bo on April 16, 2004 at 19:14:43:
Not having proper ballast won't cause breakage, but could lead to an event which does. Using a loader without sufficient rear ballast can result in the tractor tipping forward. Rolling over or lifting the rear up, then letting it fall to the ground would cause damage. Same for heavy loads on the rear and not having enough counter-weight on the front. The weight balance is supposed to keep the tractor's tires in contact with the ground for the best traction and handling, regardless the position or load of mounted equipment (under proper working conditions). Being properly ballasted is not going to prevent breakage from a design flaw or an overstress due to improper use.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Engine Rebuild Kit - by Curtis Von Fange. I always liked engine rebuild kits. They have all the replacement parts for overhauling an engine without going to the store to get gaskets, special measuring tools, or miscellaneous parts. They come neatly packaged, clean and tidy. But it's important not to let that packaging lull you into a false sense of security. The appearance of matching sleeves, pistons, rings, and bearings can cause frustration and agony if not properly measured and installed in a workshop environment. Following c
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
